product which exhibits excellent water resistance, flexibility, good temperature resistance and good slump resistance.
GNS 711 CONSTRUCTION ADHESIVE
One Part, easy to use.
Paintable & gunable.
Construction adhesive, high bond strength, excellent green strength, multipurpose, excellent to most common building materials (not be used for plastics.
or related substrate)
Very good water and weathering resistance, durability and adhesive properties.
Being suitable for interior & exterior general construction work.
APPLICATION
Before use, open cartridge by cutting off plastic nipple above screw thread with a sharp knife. Attach nozzle to cartridge and cut it slantwise (opening at least Ø 5 mm).
Apply adhesive evenly in dots or lines every 20-40 cm, depending on weight of material. Always apply adhesive in corners and along edges. Join parts immediately with a sliding movement and press or tap firmly. Adjustments can still be made. In case of materials under tension or two non-porous materials, apply the 'Power Bonding Method': fix material, press and pull off immediately. Let dry for 5 minutes, fix in the same place and press or tap firmly. Adjustments cannot be made. If necessary, secure or support heavy materials.
SURFACE PREPARATION
Clean all grease, dirty, water, klunky adhesive from surface, accessories and protective coatings and any pollutant left inside joints and sunken parts. For best results wipe all surfaces with GNS cleaner, methylated spirits or acetone, use a lint free cloth, then wipe again with a dry lint free cloth. Detergent or soap water treatments are not recommended.
Audited Supplier 
){kind=link}
){kind=link}