Room Temperature Moisture Curing Excellent Adhesion Polyurethane Sealant

• Customization: Available
• CAS No.: None
• Formula: Mixture
• Model NO.: PU765
• EINECS: Mixture
• Bonding Function: Instant Adhesive
• Morphology: Solvent
• Application: Construction
• Material: Polyurethane
• Classification: Room Curing
• Main Agent Composition: Natural Polymer
• Characteristic: Weatherability
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Color: White
• OEM: Available
• Delivery Time: 2-3weeks
• Shelf Life: 12 Months
• Tack Free Time: <5hours
• Type: Cartridge/ Sausage
• Curing Time: 24 Hours
• Carton Per Piece: 24PCS/Ctns
• Volume: 310ml
• Transport Package: Cartridge
• Specification: 310ML
• Trademark: GNS
• Origin: Guangdong
• HS Code: 3506100090
• Production Capacity: 600000

Product Description

GNS PU765 PU Sealant-Construction
 

Product Description

 

GNS PU765 PU Sealant-Construction

PU765 is one part room temperature moisture uring polyurethane with high adhesion strength,aging resistant,vibration exhaustion resistant,low temperature resisitant and free-corrosive properties,it is excellent for where gap filling requirements are needed.

Detailed Photos

TYPICAL USE
It is highly reommended for the bonding and jointing precast panel,wood,aluminum and PVC joinery seams,curtain wall,bakes clay and concrete roof titles in construction area,and other exoansion joints in traditional construction.

Color:Black,Grey,White

 

 

PACKAGING

310ml,24pcs/ctn


STORAGE AND SHELF LIFE
9 months from manufacture date when store in cool dry locations below 25ºC, keep away from heat source and direct sunlight during storage.

Installation Instructions

 

Technical Data

Testing Items^(2)	Performance
Appearance	Black/White/Grey homogeneous paste
Density  (g/cm³)	1.35±0.1
Sagging properties(mm)	0
Shore A-hardness(A°)	20-40
Tensile strength( Mpa)	≥0.8
Elongation at break (%)	≥600
Touch Dry time  (h)	1~3
Extrudability   (g/min)	≥100
Pollution properties	Non
Application temperature  (ºC)	+5~+35
Shelf life(month) ^(3)	≥9

APPLICATION

Before use, open cartridge by cutting off plastic nipple above screw thread with a sharp knife. Attach nozzle to cartridge and cut it slantwise (opening at least Ø 5 mm).

Apply adhesive evenly in dots or lines every 20-40 cm, depending on weight of material. Always apply adhesive in corners and along edges. Join parts immediately with a sliding movement and press or tap firmly. Adjustments can still be made. In case of materials under tension or two non-porous materials, apply the 'Power Bonding Method': fix material, press and pull off immediately. Let dry for 5 minutes, fix in the same place and press or tap firmly. Adjustments cannot be made. If necessary, secure or support heavy materials.

SURFACE PREPARATION
Clean all grease, dirty, water, clunky sealant from surface, accessories and protective coatings and any pollutant left inside joints and sunken parts. For best results wipe all surfaces with GNS cleaner, methylated spirits, use a lint free cloth, then wipe again with a dry lint free cloth. Detergent or soap water treatments are not recommended.
COMPATIBILITY TESTING
Incompatibility of glazing materials can lead to sealant discoloration and/ or loss of adhesion. To help protect against these problems and to ensure compatibility, GNS will also test and provide information on the compatibility of accessory materials (gaskets, spacers, etc.) and other GNS silicone sealants.




Caution
Uncured silicone can irritate eyes and skin. If contact is made with eyes, flush with water for 15 minutes and seek medical advice. Use in well ventilated area and keep out of reach for children.
LIMITATIONS

1.   Not recommended for use on structural application.
2.   Do not use in the manufacture of Insulated Glass (IG) Units.
3.   Do not use when substrate temperature is above 50ºC or surfaces that are plasticizers, oily, greasy, dusty or dirty.
4. Do not use for painted surfaces, otherwise may cause seal failure as the paint cracking or paint stripping.
5. Do not use for confined space or surfaces that require post finishes or paintings.
6.   Do not clean or treat the sealant with materials, solvents or cleaning agents that may affect or discolor the sealant, particularly during sealant cure.
7. Not for fireproofing seal system.
8.   Not for frost-laden or wet surfaces.
9.   Not intended for food-contact applications.

 

Company Profile

Gunuo (Tianjin) Industrial Co., Ltd. is a group of company in China which specializes in PU foam, silicone sealant, acrylic
sealant, PU sealant, adhesive and so on. We have two manufacturing plants located in Tianjin and Foshan China. Our factory covers
200,000 square meters with 32 advanced full automatic PU foam production lines. We produced and sold out more than 160 million
cans in 2018 with 55% market share. Our annual silicone sealants production capability is 20000 tons. Our products meet American
Standard, European Standard, China Standard and some other International Standards.

FAQ

1. who are we?
We are based in Tianjin, China, start from 2010,sell to Domestic Market(90.00%),Mid East(3.00%),South America(2.00%),Southeast
Asia(2.00%),Africa(00.00%),Oceania(00.00%),Northern Europe(00.00%). There are total about 301-500 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
PU Foam/Silicone Sealant/Other Adhesion Products

4. why should you buy from us not from other suppliers?
Biggest PU Foam factory in Asia with 32 advanced full automatic production lines. 19 years manufacturer; 55% market share of PU
foam in China.

5. what services can we provide?
Accepted Delivery Terms: FOB,EXW;
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A;
Language Spoken:English,Chinese