General Purpose Acetoxy Room Temperature Cure Silicone Sealant for Glass

• Customization: Available
• CAS No.: None
• Formula: Mixture
• Model NO.: G22
• EINECS: Mixture
• Bonding Function: Instant Adhesive
• Morphology: Solvent
• Application: Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing
• Material: Silicone
• Classification: Room Curing
• Main Agent Composition: Natural Polymer
• Characteristic: Weatherability
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Color: White
• OEM: Available
• Delivery Time: 2-3weeks
• Shelf Life: 12 Months
• Tack Free Time: <5hours
• Type: Cartridge/ Sausage
• Curing Time: 24 Hours
• Carton Per Piece: 24PCS/Ctns
• Volume: 240ml/280ml/300ml
• Transport Package: Cartridge
• Specification: 240ML/280ML/300ML
• Trademark: GNS
• Origin: Guangdong
• HS Code: 3506100090
• Production Capacity: 600000

Product Description

GNS G22 GENERAL PURPOSE SILICONE SEALANT
 

GNS G22 GENERAL PURPOSE SILICONE SEALANT is a cost effective, general purpose acetoxy cure silicone sealant which offers long term durability in a range of general sealing and general glazing applications. It can be used to glaze, seal and fill joints on windows, signs, internal fixtures and fitting like doors and so on.


 

 

Test Parameter	Unit	Result
As Supplied Tested at 23ºC and 50% RH
Specific Gravity	g/ml	0.94±0.02
Flow (sag or slump)	mm	0
Extrusion Rate	ml/minute	130
Skin Time	minute	5~10
Tack-free Time	hour	≤1.0
Curing time (5mm)	hour	≤18
As Cured-after 21 days at 23ºC and 50% RH
Durometer Hardness, Shore A	Points	18
Movement Capability	%	±20
Tensile/Modulus at 50% Elongation	Mpa	0.28
Tensile/Modulus at 100% Elongation	Mpa	0.3
Ultimate Tensile Strength Ultimate Elongation at Break	Mpa %	0.4 375

FEATURES 

1. Easy to use - one part, no mixing required. Can be dispensed with an ordinary caulking gun.
2. Cures to a strong, flexible seal capable of withstanding movement in and around the joint.
3. No seasonal limited in application.
4. Outstanding weatherproofing ability, resisting to ultraviolet ray, ozone, snow, or temperature extremes.
5. Non-slumping; can be used in vertical and overhead joints.

PACKAGING
Available in: 
Standard Size:
300ml recyclable plastic cartridge, 24ctgs/ctn
590ml aluminum sausage, 20ssgs/ctn
Special Size:
Contact us for special size.
COLORS         
Available for four standard colors: Translucent, White, Black, Aluminum.
Contact us for special colors.

STORAGE AND SHELF LIFE
10 months from manufacture date when store in cool dry locations below 25ºC, keep away from heat source and direct sunlight during storage.

 

APPLICATION
Cut seal on top of cartridge. Screw on nozzle and cut the nozzle at 45°angle to the desired shape and size. For better appearance, cover outside of joint areas with masking tapes before application. Tool immediately after sealant application and remove masking tape before sealant skins
SURFACE PREPARATION
Clean all grease, dirty, water, clunky sealant from surface, accessories and protective coatings and any pollutant left inside joints and sunken parts. For best results wipe all surfaces with GNS cleaner, methylated spirits, use a lint free cloth, then wipe again with a dry lint free cloth. Detergent or soap water treatments are not recommended.
COMPATIBILITY TESTING
Incompatibility of glazing materials can lead to sealant discoloration and/ or loss of adhesion. To help protect against these problems and to ensure compatibility, GNS will also test and provide information on the compatibility of accessory materials (gaskets, spacers, etc.) and other GNS silicone sealants.



Caution
Uncured silicone can irritate eyes and skin. If contact is made with eyes, flush with water for 15 minutes and seek medical advice. Use in well ventilated area and keep out of reach for children.
LIMITATIONS

1.   Not recommended for use on structural application.
2.   Do not use in the manufacture of Insulated Glass (IG) Units.
3.   Do not use when substrate temperature is above 50ºC or surfaces that are plasticizers, oily, greasy, dusty or dirty.
4. Do not use for painted surfaces, otherwise may cause seal failure as the paint cracking or paint stripping.
5. Do not use for confined space or surfaces that require post finishes or paintings.
6.   Do not clean or treat the sealant with materials, solvents or cleaning agents that may affect or discolor the sealant, particularly during sealant cure.
7. Not for fireproofing seal system.
8.   Not for frost-laden or wet surfaces.
9.   Not intended for food-contact applications.

 

Company Profile

Gunuo (Tianjin) Industrial Co., Ltd. is a group of company in China which specializes in PU foam, silicone sealant, acrylic
sealant, PU sealant, adhesive and so on. We have two manufacturing plants located in Tianjin and Foshan China. Our factory covers
200,000 square meters with 32 advanced full automatic PU foam production lines. We produced and sold out more than 160 million
cans in 2018 with 55% market share. Our annual silicone sealants production capability is 20000 tons. Our products meet American
Standard, European Standard, China Standard and some other International Standards.

FAQ

1. who are we?
We are based in Tianjin, China, start from 2010,sell to Domestic Market(90.00%),Mid East(3.00%),South America(2.00%),Southeast
Asia(2.00%),Africa(00.00%),Oceania(00.00%),Northern Europe(00.00%). There are total about 301-500 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
PU Foam/Silicone Sealant/Other Adhesion Products

4. why should you buy from us not from other suppliers?
Biggest PU Foam factory in Asia with 32 advanced full automatic production lines. 19 years manufacturer; 55% market share of PU
foam in China.

5. what services can we provide?
Accepted Delivery Terms: FOB,EXW;
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A;
Language Spoken:English,Chinese