GNS A99 LOW EXPANSION GLUE FOAM is a one component aerosol polyurethane adhesive foam curing swiftly with moisture.
Providing very fast and powerful adhesion for various construction materials, especially highly recommended for heat insulation systems.
PRODUCT FEATURES
• Powerful adhesion of polystyrene heat panels (XPS and EPS).
• Instant adhesion and wall plugging within two hours.
• More economical. Ready to use in aerosol can.
• Minimum 14 m² heat insulation panel adhesion for each can.
• Minimum expansion during drying period.
• After dried, no further expansion and shrinkage.
• A lighter material compared to plaster, alternative material, used in heat
insulation systems.
• No more extra burden or weight to building.
• High yield up to 50 liters, depending on the humidity and temperature.
• Fire Class: E (According to EN 13501-1. It refers to B2 for DIN 4102).
• Usable at low temperature like 0 °C
• It does not contain any propellant gases which are harmful to the ozone layer
APPLICATION INSTRUCTION
Shake the aerosol can for at least 40 seconds;
Clean and moisten surfaces with a water sprayer prior to application;
Fit the gun or plastic applicator on the adaptor.
Firmly screw the can on the adapter and turn the flow adjustment screw;
Fill the holes and cavities.
Bottom up during application; Foam will be tack-free in about 10 minutes;
Excess can be trimmed in about one hour;
Fresh foam can be removed by using GNS Foam cleaner
Cured foam can only be removed mechanically.
Audited Supplier 
){kind=link}